The question asked in the Facebook INAV Fixed-Wing Group was simple. What plane (kit, or PNP, not scratch-build or 3D printed) will you be flying in 2022? There were no qualifications to the question. No “Best plane for new pilots” or “Best plane from Germany.” Just, what will you be flying? Thus, this isn’t a beauty contest with people voting for planes they will never own nor fly. It’s a glimpse into what interests us.
This is the second year in a row we did a survey. Last year the survey was for RC Kit planes only. This year we didn’t specify kits or PNP planes though in a recent survey, more people in the group tended to like kits over scratch builds.
Comparisons to last year
The results were interesting. The first five planes had fairly large gaps between them, in double digits. But, when you get to plane 6 and lower, only a vote or two separates these planes. This means that there are some fairly obvious models of planes that people tend to like, usually as a first or second INAV build. But, there is a lot of diversity in where to go after you have the obvious builds under your belt.
The survey also highlights the current state of the RC Flying hobby right now. People are flying what they can get their hands on. Readymade RC’s Nano Goblin dropped from #6 on the survey last year to #20 this year, likely because it was out of stock. The supply chain issues have certainly curtailed what is available, and often, what is available is at considerably higher prices than they were a couple of years ago. Hopefully we’ll see a turn-around in 2022 and more planes will be back in stock without the sticker shock.
We’ll review the planes and the interesting stats about the planes that give us a clear picture as to what is really going on

.
Top 10 Planes
#1. SonicModell – AR Pro – 154 Votes

For the second year in a row the SonicModell AR Pro takes top honors. This time, it took a commanding lead over second place. This plane sold out in one day when it was introduced in 2020; and pilots enthusiastically rate this plane. It’s a 1000mm flying wing with ample room to place your FPV gear in the bodacious air-cooled compartments. Designed by input from the FPV community, this plane:
- Flies well
- Is inexpensive
- The PNP comes with decent gear
- It can hold a lot of batteries making it a good platform if you want to take it out long distances.
The only drawbacks are that the plane is difficult to launch and is a bit more fragile than its little sister, the AR Wing. Still, this is the plane many have raved about. Due to it’s larger wingspan it has a lower stall speed than the AR Wing. Bang for the buck, this is one of the best deals for INAV FPV around.
FYI, ZOHD is the sister company of SonicModell.
#2. SonicModell – AR Wing – 131 Votes

The AR Wing (RMRC Recruit) is the quintessential RC FPV plane. It’s a favorite choice of first INAV plane for many of our group members. This 900mm flying wing accepts a wide range of motors and you can configure it in many different ways. It can fly fast, slow, or anywhere in between. Some have been able to get good flight times with it and do good midrange FPV. with this plane. It’s inexpensive, built rugged, and just never gets old. This is a plane people tend to hold onto.
The AR Wing came out around 2017/ 2018 and by now it should be showing signs of age. Instead, going on five years later, it continues to set the bar. Back in the days before INAV 3.0 where tuning was often difficult this was the one plane that flew at least “OK” with a poor PIFF tune. It can also take a mild amount of abuse, when it comes to crashing.
There are different models of the AR Wing. The “kit” version lacks electronics, but a lot of the assembly is complete. The “Classic” version is a kit with absolutely no assembly. You will have to glue in all the wood, control horns and other details by yourself. This make customization fairly easy for this “classic” version since you can further refine the plane before final assembly. The PNP version comes assembled with the motor, servos and ESC already installed. The motor is a quad motor which works okay on 4S. You may want to consider a 2212 motor with 8×4 prop instead along with a better speed controller. We have build guides for this plane on this website.
#3. ZOHD – Dart 250G – 93 Votes

The Dart line of planes started off with a plane that wasn’t much larger than this plane. It has a cult following. Next was the the Dart XL which was an macho 1-meter version of this swept forward wing concept. The Dart 250G is a plane that is more beloved than the other two versions. At 250g the FAA considers the plane a toy and thus doesn’t require registration. With the miniaturization of today’s FPV gear there are plenty of choices available to make this plane full FPV. Our site does have a long-range setup guide for this plane. Don’t let the small size (570mm wingspan) fool you. It can go places. Built for fun, this plane flies well and is an attractively priced PNP plane.
The sub-250g acceptance has been mixed. It’s obvious why manufactures like the market, the molds cost less, packaging costs less and shipping costs less. The Strix Nano Goblin was in the top 10 planes of 2021 but fell to 20th place when inventory got sketchy. The high placement of this plane in this survey indicates that there is still a market for 250g planes. However, the Talon 250G, also from ZOHD, not being high up in the list could also indicate the contrary. The Talon 250G being newer and a good model.
#4. Reptile – S800 Sky Shadow – 81 Votes

The S800 is an early take on the modern FPV flying wing. It was a beloved FPV plane over 5 years ago, and then lost ground to the newer, more spacious AR Wing. A lot of people had the S800 and moved on from it. The space in the fuselage was small and tight. But it had two things going for it: 1) it was cheap as chips, 2) it is really tough, and 3) it was always for sale, everywhere. Due to better motors and smaller footprint, lighter FPV gear, the S800 has staged a comeback.
There are lots of options to customize it, with plenty of 3D parts available on Thingiverse. With a little ingenuity and this plane is sweet! Take your time, read up about motors and flight controller, modifications and placement of gear. For a reference we have Project Rosetta Stone which walks you through the setup of an S800 on this website. We make recommendations along the way. Combining in at 800mm wingspan it’s a plane you’ll enjoy.
#5. X-UAV – Mini Talon – 69 Votes

If you’re excited about mid to long range FPV this most likely a good intermediary step. You should cut your teeth on the cheaper, more common planes on this list when you first start in FPV. By the time you buy this plane you’re into designing planes You will need to put some research into the powertrain, 3D printed parts, modifications, batteries, ground stations. This is a platform you learn on, and if things go horribly wrong you pick up the pieces and buy another Mini Talon. Though there are certainly some newer, larger and more sexy FPV platforms, this is a plane that just works. This is a beloved plane by those in the long-range FPV community.
As far as the Talon series goes, this gets confusing. From largest to smallest it goes like this:
- X-UAV Talon
- X-UAV Talon Pro
- X-UAV Mini-Talon
- ZOHD Talon GT Rebel
- ZOHD Nano Talon/Nano Talon Evo
- ZOHD Talon 250G
Though it may appear to be small, the Mini Talon boasts of a 1300mm wingspan. This is a mid to long-range FPV platform. This plane has three things going for it:
- its inexpensive
- it flies well
- you can be load it up with huge batteries
People have found some issues with this plane such as the slim fuselage, which can be a bit challenging. X-UAV addressed the issues with a new version of the plane, Talon Pro. The wingspan is around 50mm wider, and the cargo room is a lot more spread out. Also, it needs a strong, flat throw when launching. At the time of writing this, Raceday Quads had both in stock. The Mini Talon is $69 and the Talon Pro is $169. It’s part of the “Be careful what you ask for, you just might get it.” In a perfect world, the Talon Pro would be $99. The Talon Pro did get a few votes in our survey but so far it’s not getting a lot of interest.
#6. SonicModell – Mini AR Wing – 49 Votes

Following up with its success with the AR Wing, SonicModell went smaller with the Mini AR Wing. At the time of the poll it was out of stock everywhere. But, more are on the way!
What makes this plane remarkable is that it comes with the motor, servos and speed controller pre-installed for around $50 for this 600mm flying wing. There are plenty of compelling flight controllers for this plane. A lot of people love the way it flies, while others complain a bit about yaw waggle and shorter flight times. On the positive side, this plane can to take a hit or two and bounce back. Fun for proximity flying, shooting the gaps, or ripping up the field with your friends this plane is a crowd pleaser. The FPV camera goes in the nose which means that it may need frequent cleanings if it lands in wet or dusty areas.
#7. AtomRC – Dolphin – 47 Votes

One of two new planes to breach the top ten list of 2022; the Dolphin has won over its critics. Perhaps it’s eye-candy appearance made some people sceptical. It certainly is the most unique looking plane of the top ten planes on the list. The tall winglets/stabilizers are similar to the Eachine Blackwing, which is a bit smaller than the Dolphin, but boasts of smooth flying characteristics.
Some have tried to load this plane up with large motors and large batteries while others stick to the small, light motors in the back, smaller prop and lighter build. Many are reporting very good flight times and lovely flight characteristics. There is plenty of room inside this 845mm wingspan wing for your flight controller which makes it a natural for INAV. If you buy this plane you should buy the kit and put some nicer gear inside than what comes with the PNP. Metal gear servos and a compelling quad around the 2206 range. There are many fantastic motors for around the $20 range that will make this plane scream.
AtomRC got nominated for two other planes. The Killer Whale, which is a twin motor plane was largely ignored until it went on sale last year. Then many bought it and loved it. The newer “Seal” by AtomRC appears to be an FPV version of the Bixler 2 with mixed reviews.
#8. HeeWing – T1 Ranger – 46 Votes

HeeWing is an upstart company that made the Ripper R690 for Diatone; then released teir own version, the F-01 in a different foam. The T1 Ranger is unique because it’s a 730mm wingspan plane with dual tractor motors. It’s a traditional plane with a full tail, but lacks a rudder. A lot of people went crazy over the introduction of this plane, and a lot of people have ordered it. But, it won’t really be put to the test; until the masses escape winter. Thus, keep your eyes on the posts from members from the group. So far the posts have been very positive about this plane. Just keep in mind smaller wingspan planes tend to be a bit more squirrely and are more susceptible to wind turbulence.
This plane did knock out the AlbaBird from the top 10 which is another, larger. dual tractor motor plan; with a rudder and a devoted following. The Ripper R690 seemed to be the plane of the moment during last summer. Lots of maiden videos and love for the Ripper. The members of the group who really know planes have given this plane a thumbs-up or at least have mentioned they will buy this plane. Check back next year to see if this plane moves up higher on the list!
#9. ZOHD -Drift – 44 Votes

The Drift made the top 10 last year, but fell two spots to number 9 on the top 10 list. Last year, I did a survey of the group to ask about this plane. It got mixed reviews and quite frankly I am surprised to see it in the top 10 this year. Many have pointed out that it’s a calm weather type of plane with long flight times on 2S; it can be a sub 250G plane if you try. Some have categorized it as a parkflyer/cruiser which to me means that a lot of people into relaxed FPV and proximity flying.
This is a mid fuselage pusher plane with a 877mm wingspan. This is another elevator/aileron combination plane like the T-1 Ranger that is a ‘bank and yank’ style of plane. For a lot of pilots who come from flying wings, this will be a familiar experience. It’s a similar style to the Bixler/Ranger line of planes as far as being a mid-fuselage pusher. Some have seen that the tail is offset; and some actually have intentionally broken it off just to reset it. Otherwise, it has a tendency to pull to the left. This isn’t an issue all too uncommon with mid-fuselage pusher style planes and it’s not a knockout factor. Just the same, this plane could most likely use a V2 update.
Since this is the only mid-fuselage pusher plane on the top ten list I’ll break it down this way. Traditional planes have their own style. They can be very wonderful. A tractor fed plane like a Radian, Alba Bird, or Phoenix just fly out of your hands. They have their own personality. The mid fuselage pushers have motors above the thrust line. When you give them power they tend to push the nose down. Thus, they are more challenging to launch. And, of course they fly different from tractor fed planes. When you really get into these planes you can really tell the difference between both as they fly.
#10. ZOHD – Nano Talon – 39 Votes

The Nano Talon is an 860mm four control surface version of the Mini Talon. With the introduction of the Talon 250G, this is now the second smallest Talon style plane. It’s a cute little plane that uses magnets to attach the ruddervators. It goes back into a box for storage. The older version of this plane had upswept wings; which were hated by nearly everybody. Thus, a wing mod using 3D printed parts made that version of the plane flyable. The newer version of this plane has the flat wings.
It’s a nice plane, people tend to really like it. It tends to fly well with a 4S 1300mah battery. Much heavier and the plane can have issues with elevator authority. You will need to learn how to throw the plane with the motor off or how to launch it while keeping your hand away from the prop. This plane can fly well. You may want to get Lithium Ion batteries for longer flight times with this plane. It’s a cruiser. This plane has a proprietary motor mount; 3D printable replacements are on Thingiverse. The foam doesn’t like a lot of abuse.
Planes 11-20
11. Finwing – AlbaBird
12. RiteWing – Nano Drak
13. VolantexRC – Ranger 2000
14. RiteWing – Mini Drak
15. Reptile – Dragon II
16. VolantexRC – Ranger 1600
17. MyFlyDream – Mini Crosswind
=18. ZOHD – Dart XL
=18. Zeta – Wing Wing Z84
=19. Diatone – Ripper R690/ HeeWing F-01
=19. ZOHD – Talon 250G
=20. HobbyKing – Bixler 2
=20. Strix – Nano Goblin
What the numbers tell us
As discussed in the INAV Fixed Wing Group; when a plane doesn’t make it into the top 20, it’s votes are void. All stats that I review here are based on these first 20 planes only, not all votes in aggregate. Thus, these 1101 votes are for the top twenty planes only, not all the votes counted.
- Total Votes 1101
- Mean (Average) 47.89 votes per plane
- Standard Deviation 35.78509637 votes
- Top 10 Planes 753 Votes (68% of all votes)
The first five planes receiver 69 or more votes, the sixth plane dropped 20 points to below 50 votes. Thus, the first five planes heavily skewed the polls. What this means is that a lot of people fixate on a handful of models. The Mini AR Wing and everything after it were all clustered in tightly. The standard deviation for planes 6-20 drops to 10.25 (from having a deviation of over 30 for all 20 planes). INAV tends to work well with a wide swathe of planes and this is where things segment. You have a lot of different directions you can go depending on your taste and flying style.
Control surfaces
This is a chart showing the top 20 planes based on the number of control surfaces (not counting flaps). As you can see, the two control surface planes are by far the most popular. They made up a bit more than half the planes on the list. Four control surfaces received around 40% of the vote. These include the traditional tail planes like the AlbaBird, Bixler 2, Mini Crosswind, and the Talons.
Interesting to point out that not one traditional tail plane made it into the top 10 planes on the list. The Ranger T-1 and Drift both made it on the top ten with their faux traditional tail. To be fair, they both have vertical and horizontal stabilizers on their tail so they are true traditional tail planes. But both lack rudders which make them 3 channel ‘bank and yank’ planes. When we discussed these planes on Wing Talk; the panellists concluded that both the Ranger and Drift would benefit from a working rudder.
Vendors

The last graph is perhaps the most interesting. Starting from 12 o’clock moving right the numbers go from largest to smallest. All the votes counted by vendor. As you can clearly see, one vendor accounted for half of all 1101 votes in the top 20 planes. I counted SonicModell and ZOHD as one company. They are two different brand names of sister companies. 8 of their planes made the top 20 planes on the list accounting for 554 votes.
Coming in second was Reptile with 109 votes. The S800 made the #4 spot on the survey and the Dragon II was #15. Ritewing was #3 in the poll for quite a while when some last minute voters pushed X-UAV to the #3 spot. It was their Mini Talon that pushed out RiteWing’s combination of Mini Drak and Nano Drak. HobbyKing isn’t listed, who came in #20 with the Bixler 2.
Again, this list is skews toward what is available. The AR Pro is usually in stock and really hasn’t surged in price quite like other planes have in the past year. The Mini Drak is out of stock for the time being, but the Nano Drak have been readily available the entire pandemic.
Wingspan
The mean is the average wingspan for all the top 20 planes. Median means that an equal numbers are above or below the median on the list. Mode means the number that comes up the most. And standard deviation means how much they differ from each other. If we had three planes 500mm, 1000mm and 1500mm they would average 1000mm with a 500mm standard deviation.
- Mean 993.2mm
- Median 860mm
- Mode 1000mm
- Standard Deviation 380.8mm
What these numbers tell me is that larger planes are what were flying. 1000mm is a nice size for a wingspan of a plane. My theory is that the molds are smaller and thus cheaper for the smaller planes and the packaging is smaller and it’s cheaper to ship. I can see why HeeWing likes the 690mm-730mm. 7 of the the planes had wingspans less than 800mm, the other 15 had wingspans equal to or greater than 800mm. Planes 18,19,and 20 had two way ties thus there were 23 planes on the list.
The take-away is from this is that people tend to like larger planes. The #3 spot on the survey was the Dart 250G which is a highly-regarded plane. However, the next planes in the 250G category were in 19th and 20th place , the Talon 250G and Nano Goblin. The Goblin had stocking issues and scored in the top 10 last year. The Talon 250G came out last year and hasn’t caught on like the Dart 250G. My take-away from this is that we may be at our saturation point with nano planes and the group, in general, tends to embrace larger airframes.
What this all means for 2022
The real story wasn’t the first five planes, it’s the other planes that came after them. They show diversity in what we’re flying. It also leads me to believe that we’re attracted to certain planes by flying style. Some people are interested in long-range FPV, and only want to consider planes that can stay flying for over an hour. Still others are into speed and don’t care if the flight is less than 3 minutes. Still, if relaxed FPV is your thing, and you strive for 15 to 25 minute flights there are a fair number of planes that will work for your needs. There is a lot of diversity in preferences.
Thanks to the improved PIDFF and rates tuning in INAV 3.0 and INAV 4.0; people are finding success flying planes with one simple autotune. This means that planes which have been notoriously difficult to tune are suddenly viable. Part of the allure of the AR Wing is that it was that it flew well, even with a poor tune. Now, you don’t need to stick to the usual suspects. Which leads to the final point, your beloved planes.
The usual cycle
You will see this in the INAV Fixed Wing Group all the time. Company XYZ puts out a teaser photo of their new plane, the “Widget”. People in the group discuss the plane; and then someone gets the first one and makes an unboxing video of the Widget. Then a few days later the first flight video comes out. A week later the vloggers have their Widget reviews done. For the next month every other post is about the Widget. Then, a couple of months later nobody is mentioning the Widget anymore. Banggood has The Widget on year end sale for 40% off and people wonder if it’s a good plane?
There are fad planes in this hobby. If you have a plane that you enjoy the best thing to do is create a post about it talking about what you like about it, how you have it setup, how far you can fly it, how long you can fly it, how you fly it. People don’t want to get stuck with hype planes. But always are interested in something that speaks to them.
