We have produced a great set of OpenTX models for the INAV community. Initially they were made to help people new to the hobby get started quicker. We provided the Standard model, which included all the features that pilots new to INAV would need, and some built in safety features to help teach good habits while using the transmitter. Next up, we introduced the Pro model, for more advanced pilots. This stripped back the training features, and added support for in flight tuning and flying waypoint missions. Finally, the Lite model was released. This was more like the standard model, but also included some features from the Pro. Basically, we tried to squeeze as much as possible on to transmitters with a much lower number of switches.

From all the positive feedback we’ve had, we know that people are enjoying using these models, and they are working well for their pilots. However, I’ve always been a supporter of people learning OpenTX. This is a great, powerful firmware with lots of options and features. In fact. People have also talked about customising these OpenTX models to fit their specific needs. Unfortunately, we all only have limited time. So, supporting everyone looking to do this, and answering questions isn’t realistic. So that is where this page comes in. I am going to go a little more in-depth, and provide some useful helpers to understand the switches, functions, and other elements of these models. You will of course still need to understand how things work in OpenTX. But this should give you a good head start.

The plan for this guide

I’m first going to take a look at some global things that are true for all the models. Then we will dive in to each model and look at specific things for them.

Logical Switches and Global Functions

You may have noticed on these models that if you go to the logical switches or global functions pages, they appear blank. However, a little digging about, and you’ll find them at the bottom of the pages. Why have I done this? Firstly, because they are kind of hidden. As I mentioned in the intro, the original pack was made for people new to OpenTX. So, hiding the logic seemed like a good idea. People are inquisitive, but they also wouldn’t be happy if their model stopped working in some way. Also, it seems like the logical switches and global functions are processed in order from 1 to 64. So any bits of logic or any functions below, should override anything above. This should ensure that the core model coding works as expected. It does, however, make these models a bit more of a pain to build.

Standard Model V2

Pro Model

Lite Model